1. Home
  2. Knowledge
  3. Gravity‑Based Stacker Advantages for High‑Efficiency Stacking of Conventional Sheet Materials

Stackers are mainly divided into gravity‑based stackers and magnetic stackers. Working together with conveyors, gravity‑based stackers let sheets fall onto receiving trolleys by gravity for layer‑by‑layer stacking and feature outstanding speed performance for conventional sheet processing.

After sheets exit shearing equipment, conveyors transport them above receiving trolleys. Sheets lose support at the conveyor end and drop by gravity. Side‑aligning devices tap four edges to square each sheet. The trolley descends automatically as stack height increases to maintain constant drop distance and mitigate impact force.

Gravity‑based stacking delivers high throughput owing to continuous conveyor feeding. Conveyor linear speed can be adjusted to match shearing velocity of cut‑to‑length lines or blanking lines, so the stacker will not become a production bottleneck.

This solution is suitable for ordinary carbon‑steel and stainless‑steel sheets without strict surface‑quality requirements. Free‑fall impact may cause minor dents. Therefore magnetic stackers are preferred for pre‑coated sheets, mirror‑finish panels and aluminum sheets susceptible to surface damage.

Aligning devices need properly‑adjusted tapping force and stroke. Insufficient force results in poor squareness; excessive force deforms sheet corners. Softer tapping is required for thin sheets while heavier force applies to thick plates. Adjustable aligning mechanisms accommodate varying sheet thickness.

Installed at the end of blanking lines, gravity‑based stackers build neat sheet stacks. Automatic trolley‑change‑over enables non‑stop production when one trolley is fully loaded.

Replacing slow, inconsistent manual stacking, the system realizes full‑process automation from shearing to stacking. Operators only supervise equipment and swap trolleys. Stack squareness and consistency are improved, manual‑caused scratches are reduced, and personnel are kept away from moving machinery and sharp sheet edges.

Guangdong Ruihui Intelligent Technology Co., Ltd., a national Specialized, Refined, Differential and Innovative “Little Giant” enterprise headquartered in Dongguan with over 20‑year stamping‑automation experience, employs more than 400 staff including over 80 R&D engineers. Ruihui supplies both gravity‑based and magnetic stackers. High‑speed gravity‑based stackers with automatic trolley‑switch function are widely deployed at the outlet of blanking lines within automotive, home‑appliance and hardware industries. Nearly 5,000 sets of Ruihui‑manufactured equipment operate globally, serving well‑known OEMs and Tier‑one suppliers such as BYD, Geely, Volkswagen, Tesla, BMW, Mercedes‑Benz, Honda and Jaguar Land Rover.

With years of hands-on experience, I have honed my skills in navigating the complexities of global commerce, offering invaluable insights and solutions to address customer needs. My commitment to excellence and dedication to customer satisfaction ensure that I deliver exceptional service, guiding clients through every step of the trading process with confidence and proficiency.

icon of whatsapp Chat on WhatsApp