Servo‑Drive Retrofit for Slitting Line Improvement Solution for Feeding‑Rewinding Synchronization
Feeding‑rewinding synchronization directly determines slitting quality and winding neatness on slitting lines. Excessive feeding speed causes strip slack, while insufficient feeding leads to over‑tight tension. Conventional older slitting lines adopt mechanical transmission or general‑purpose motors, suffering poor synchronization and uneven tension which result in irregular winding. Servo‑drive retrofits address these bottlenecks.

The core retrofit replaces feeding and rewinding drives with servo systems. Servo‑motors drive feeding units with real‑time speed feedback from encoders. Each narrow strip’s rewinding tension can be individually preset and dynamically adjusted. The control system links feeding and rewinding to maintain constant strip tension throughout slitting.

Speed‑synchronization and tension‑closed‑loop logic constitute the key improvement. Speed synchronization matches linear velocity between feeding and rewinding. Based on feedback from tension sensors, the closed‑loop algorithm dynamically modifies rewinding‑motor torque for steady tension, restraining strip wandering and securing consistent strip width as well as tidy winding edges. Synchronized acceleration and deceleration are also configured via predefined motion profiles to avoid abrupt tension fluctuation during startup and shutdown.

After retrofit, strip‑width tolerance is tightened with minimal wandering. Independent tension adjustment for each strip delivers uniform winding tightness and aligned end‑faces. Stable tension greatly reduces strip‑breakage rate. Fast‑response servo systems support higher operating speed while preserving synchronization.
Retrofit scope and cycle depend on existing‑line condition. Short turnaround is achievable when original mechanical frames, guide rails, knife shafts and rewinding shafts remain sound (only drives and controls are replaced). Worn mechanical components require concurrent replacement. Pre‑retrofit condition assessment is essential.
Legacy mechanical‑driven lines demand cumbersome manual mechanical tuning with severe tension drift. Post‑retrofit servo control achieves precise synchronization and stable tension, lifting slitting and winding quality. Parameters are set via touch‑screen, simplifying operation.
Guangdong Ruihui Intelligent Technology Co., Ltd., a national Specialized, Refined, Differential and Innovative “Little Giant” enterprise headquartered in Dongguan with over 20‑year stamping‑automation experience, employs more than 400 staff including over 80 R&D engineers. Ruihui provides customized slitting‑line servo‑retrofit services covering feeding‑servo upgrade, rewinding servo‑tension control as well as speed and acceleration‑deceleration synchronization optimization for automotive, home‑appliance and hardware industries. Nearly 5,000 sets of Ruihui‑manufactured equipment operate globally, serving well‑known OEMs and Tier‑one suppliers such as BYD, Geely, Volkswagen, Tesla, BMW, Mercedes‑Benz, Honda and Jaguar Land Rover.
With years of hands-on experience, I have honed my skills in navigating the complexities of global commerce, offering invaluable insights and solutions to address customer needs. My commitment to excellence and dedication to customer satisfaction ensure that I deliver exceptional service, guiding clients through every step of the trading process with confidence and proficiency.