1. Home
  2. Knowledge
  3. Common Faults and Troubleshooting for 3‑in‑1 Decoiler‑Straightener‑Feeder

Malfunctions may occur after long‑time operation of 3‑in‑1 feeders, which will halt presses and reduce output. Many typical faults can be rapidly resolved on‑site.

  1. Inaccurate feeding (most frequent fault) Unstable part dimensions are mainly caused by feeding‑roller slippage due to roller wear or oil‑contaminated strip surfaces. Solutions include roller replacement and strip cleaning. Insufficient roller pressure, loose encoder installation or signal interference shall also be inspected. Hidden cause: poor leveling leading to curved strips; adjust leveling units accordingly.
  2. Poor leveling performance Caused by worn leveling rollers, improper gap setting or insufficient back‑pressure. Replace worn rollers, adjust gaps according to sheet thickness and tune back‑pressure for different materials. Flat strips guarantee stable feeding and stamping quality.
  3. Difficult coil loading Resulting from misaligned centering mechanism of loading trolley or mismatch between coil inner diameter and reel. Calibrate centering accuracy and adopt adaptive sleeves or alternative reels for mismatched coils.
  4. Abnormal equipment noise Stop equipment immediately for inspection. Possible causes include worn feeding‑roller bearings, loose fasteners or foreign‑object jamming inside material passage. Timely troubleshooting prevents minor defects from escalating.
  5. Alarm‑triggered shutdown Troubleshoot following alarm codes. Common triggers: servo overload caused by material jamming or over‑load condition; encoder circuit or connection failure; activated emergency‑stop circuit. Contact the manufacturer if problems persist.

Most faults can be prevented by routine maintenance: regularly inspect roller wear status, clean material passages, check fasteners and perform lubrication per maintenance manual to lower failure rate and sustain long‑term stable operation.

Guangdong Ruihui Intelligent Technology Co., Ltd., a national Specialized, Refined, Differential and Innovative “Little Giant” enterprise headquartered in Dongguan with over 20‑year stamping‑automation experience, employs more than 400 staff including over 80 R&D engineers. Ruihui 3‑in‑1 feeders are designed for easy maintenance with convenient replacement of consumable rollers and clear alarm prompts for fault diagnosis. Its after‑sales team provides fast response and sufficient spare‑parts, and delivers regular‑maintenance training for customers. Nearly 5,000 sets of Ruihui‑manufactured equipment operate globally, serving well‑known OEMs and Tier‑one suppliers such as BYD, Geely, Volkswagen, Tesla, BMW, Mercedes‑Benz, Honda and Jaguar Land Rover.

With years of hands-on experience, I have honed my skills in navigating the complexities of global commerce, offering invaluable insights and solutions to address customer needs. My commitment to excellence and dedication to customer satisfaction ensure that I deliver exceptional service, guiding clients through every step of the trading process with confidence and proficiency.

icon of whatsapp Chat on WhatsApp