1. Home
  2. Knowledge
  3. Finished‑Part Collecting Palletizing Solution for Robotic Stamping Lines

Finished‑part collection is located at the end of robotic stamping lines. Traditionally, heavy stamped workpieces were manually unloaded and stacked with the aid of overhead cranes or multiple operators, which was labor‑intensive and hazardous. Robotic collecting‑and‑palletizing realizes full automation for this procedure.

Workflow: When the press ram returns to top‑dead‑center, the safety gate opens. The collecting robot enters the press working zone, grips finished parts via end‑of‑arm tooling, retracts and places workpieces onto trolleys according to programmed positions and orientations. Upon completion of one stack, the system switches to an empty trolley automatically for non‑stop stacking. Operators are kept outside hazardous stamping areas.

Robot selection depends on workpiece weight, stacking envelope and takt requirements. Sufficient payload margin shall be reserved for dynamic inertia; robot reach must cover the whole stacking area; cycle time shall match line throughput to avoid becoming a bottleneck. Custom‑designed end‑of‑arm tooling guarantees stable gripping even under high‑speed motion.

Takt matching is critical for line coordination. The robot cycle time must be shorter than press output interval to prevent part accumulation at press exit. Dual‑station stacking configuration enables alternating operation between two positions for continuous stable production.

Surface protection measures are required. Smooth contact surfaces on grippers prevent scratches. Soft cushions on trolleys mitigate friction and collision for high‑surface‑quality components.

Compared with manual stacking featuring low speed, poor stacking consistency and high safety risks, robotic stacking delivers uniform stack geometry. Manual contact is eliminated to reduce surface damage. Operators only supervise equipment and replace trolleys.

Guangdong Ruihui Intelligent Technology Co., Ltd., a national Specialized, Refined, Differential and Innovative “Little Giant” enterprise headquartered in Dongguan with over 20‑year stamping‑automation experience, employs more than 400 staff including over 80 R&D engineers. Ruihui provides integrated solutions covering robot selection, end‑of‑arm‑tool design and stacking‑trolley configuration, with proven references for large‑and‑medium‑sized automotive outer panels and supply‑chain projects for BYD, Geely, Volkswagen, Tesla and other OEMs. Nearly 5,000 sets of Ruihui‑manufactured equipment are deployed worldwide.

With years of hands-on experience, I have honed my skills in navigating the complexities of global commerce, offering invaluable insights and solutions to address customer needs. My commitment to excellence and dedication to customer satisfaction ensure that I deliver exceptional service, guiding clients through every step of the trading process with confidence and proficiency.

icon of whatsapp Chat on WhatsApp