Hot‑Stamping Production‑Line Solution Integrated Line for Heating Forming and Quenching
The hot‑stamping line is an automated production system integrating heating, stamping and quenching. Sheet blanks are heated above 900 °C, hot‑formed and rapidly quenched inside dies to produce high‑strength, lightweight components. Seamless process coordination is essential for the complete line.

At the upstream station, a destacker picks individual blanks and feeds them into the furnace. Roller‑hearth furnaces suit high‑volume continuous production, gradually heating blanks to approximately 930 °C across multi‑zone temperature control. Protective atmosphere inside the furnace prevents high‑temperature oxidation.
A feeding manipulator retrieves red‑hot blanks immediately upon furnace discharge and transfers them into the press die within several seconds to avoid excessive temperature drop. Manipulator structures and grippers adopt heat‑resistant alloy steel; vacuum suction cups are not applicable under such thermal conditions.

After stamping forming, built‑in cooling channels inside dies circulate cooling water to rapidly cool components below 200 °C for martensitic transformation. The cooling rate shall reach 30‑50 °C per second. Cooling‑channel layout is optimized via simulation to prevent deformation and inconsistent material performance caused by uneven cooling.
A discharge manipulator removes quenched hot parts with heat‑resistant grippers and transfers them to downstream conveyors.
A centralized control network synchronizes furnace, manipulators, press and cooling systems to coordinate blank discharging, material transfer, stamping and water‑cooling sequences. Comprehensive safety interlocks trigger line‑wide safe shutdown upon abnormal signals.

Manual operation is infeasible for hot stamping due to extreme workpiece temperature and strict transfer‑time requirements. Automated equipment ensures stable transfer rhythm and consistent product quality while isolating operators from high‑temperature hazards.
Guangdong Ruihui Intelligent Technology Co., Ltd., a national Specialized, Refined, Differential and Innovative “Little Giant” enterprise headquartered in Dongguan with over 20‑year stamping‑automation experience, employs more than 400 staff including over 80 R&D engineers. Ruihui delivers turn‑key hot‑stamping‑line solutions covering furnace‑handling manipulators, press load‑unload manipulators and system integration. Heat‑resistant alloy‑steel grippers are deployed for automotive hot‑formed parts manufacturing. Nearly 5,000 sets of Ruihui‑manufactured equipment operate globally, serving well‑known OEMs and Tier‑one suppliers such as BYD, Geely, Volkswagen, Tesla, BMW, Mercedes‑Benz, Honda and Jaguar Land Rover.
With years of hands-on experience, I have honed my skills in navigating the complexities of global commerce, offering invaluable insights and solutions to address customer needs. My commitment to excellence and dedication to customer satisfaction ensure that I deliver exceptional service, guiding clients through every step of the trading process with confidence and proficiency.