Selection of Hot‑Stamping Loading‑Unloading Manipulators Key Points for High‑Temperature Resistance and Load Matching
Loading‑unloading manipulators serve as core equipment for hot‑stamping lines. They handle workpieces heated up to approximately 900 °C. Improper selection will disrupt production.

High‑temperature resistance is the primary requirement. Since rubber‑based vacuum suction cups cannot survive extreme heat, end‑of‑arm tooling adopts high‑temperature‑resistant alloy grippers. Heat resistance mainly depends on the material properties of grippers. The temperature rating shall exceed maximum workpiece temperature with sufficient safety margin.

For load matching, total payload includes both hot‑formed parts and gripper weight, with extra allowance for dynamic inertia under high‑speed motion. Manufacturers shall be provided with workpiece dimensions and weight for proper payload grading.

Stroke must cover the transfer distance between furnace outlet and press die, including vertical lifting range and horizontal reach into the die cavity. Layout information of furnace and press shall be submitted for stroke calculation.
Speed matching is critical. Hot blanks cool rapidly after leaving the furnace. Insufficient transfer speed will lead to inadequate part strength. Manipulator cycle time must guarantee fast blank delivery into dies.
Thermal insulation protects drive and control modules against radiant heat. While high‑temperature‑resistant grippers are essential, overall thermal shielding for the robot body is also required.
Reliability and after‑sales support are vital for non‑stop hot‑stamping production. Stable hardware performance and accessible spare‑part supply minimize line downtime.
In brief, high‑temperature resistance acts as the threshold criterion. Payload, stroke, speed, thermal shielding and overall reliability shall be fully matched to actual workpieces and site layout. Alloy grippers are adopted for direct high‑temperature contact.
Guangdong Ruihui Intelligent Technology Co., Ltd., a national Specialized, Refined, Differential and Innovative “Little Giant” enterprise headquartered in Dongguan with over 20‑year stamping‑automation experience, employs more than 400 staff including over 80 R&D engineers. Ruihui customizes hot‑stamping manipulators with high‑temperature alloy grippers, matched payload‑stroke‑speed parameters and thermal‑protected drive systems validated under real hot‑working conditions. It has delivered hot‑stamping‑line solutions for multiple automotive‑component manufacturers. Nearly 5,000 sets of Ruihui‑manufactured equipment operate globally, serving well‑known OEMs and Tier‑one suppliers such as BYD, Geely, Volkswagen, Tesla, BMW, Mercedes‑Benz, Honda and Jaguar Land Rover.
With years of hands-on experience, I have honed my skills in navigating the complexities of global commerce, offering invaluable insights and solutions to address customer needs. My commitment to excellence and dedication to customer satisfaction ensure that I deliver exceptional service, guiding clients through every step of the trading process with confidence and proficiency.