Retrofit Solution for Press Automation Single‑Press Multi‑Station with 3‑Axis Cross‑bar Manipulator
Retrofitting existing presses into single‑press multi‑station cells equipped with 3‑axis cross‑bar manipulators represents a cost‑effective automation option for stamping plants, realizing multi‑process production within one press with lower investment compared with brand‑new complete lines.

The 3‑axis manipulator features X‑axis traverse, Y‑axis lifting and Z‑axis feeding‑retracting. Three‑axis synchronized motion enables continuous pick‑and‑place cycles to transfer workpieces between adjacent dies inside the press.
After retrofitting, multi‑station dies are installed on the press. Upstream equipment such as 3‑in‑1 feeder or destacker feeds blanks into the first station. The manipulator transfers parts among stations, and finished components are discharged by downstream receiving devices. The whole process runs automatically, with operators only performing equipment supervision.

Critical retrofit points include rational die layout whose station spacing matches manipulator traverse stroke and clearance for gripper movement. Manipulator payload shall reserve sufficient margin accounting for workpiece, gripper weight and dynamic inertia. Manipulator cycle time must be shorter than press stroke cycle to avoid bottlenecks. Interlocked control synchronizes press and manipulator signals, and safety interlocks prevent press actuation while the manipulator stays inside the working zone.

Benefits include higher throughput, reduced labor requirement and improved part consistency. One operator can monitor multiple lines. Manual‑free handling minimizes surface scratches and collisions, while operators are kept out of hazardous stamping zones. This practical upgrade unlocks full capacity of legacy presses and stabilizes product quality.
Guangdong Ruihui Intelligent Technology Co., Ltd., a national Specialized, Refined, Differential and Innovative “Little Giant” enterprise headquartered in Dongguan with over 20‑year stamping‑automation experience, employs more than 400 staff including over 80 R&D engineers. Ruihui delivers tailored press‑retrofit solutions covering die‑layout coordination, manipulator selection, control‑system integration and safety‑interlock configuration for automotive, home‑appliance and 3‑C industries. Nearly 5,000 sets of Ruihui‑manufactured equipment operate globally, serving well‑known OEMs and Tier‑one suppliers such as BYD, Geely, Volkswagen, Tesla, BMW, Mercedes‑Benz, Honda and Jaguar Land Rover.
With years of hands-on experience, I have honed my skills in navigating the complexities of global commerce, offering invaluable insights and solutions to address customer needs. My commitment to excellence and dedication to customer satisfaction ensure that I deliver exceptional service, guiding clients through every step of the trading process with confidence and proficiency.