1. Home
  2. Knowledge
  3. Gripper Design for Linear‑Transfer Manipulators Customized Clamping Solutions for Sheet‑Metal Parts

Grippers constitute the end‑effector of linear‑transfer manipulators. Their design determines gripping stability, surface protection and product‑change‑over efficiency, and shall be customized according to sheet‑metal part characteristics.

Three main gripper types are available. Vacuum suction cups apply to large flat workpieces. Quantity and layout follow part contours. Rubber or polyurethane suction pads deliver gentle handling with minimal surface damage, yet suction performance deteriorates for perforated or rough‑surface components.

Clamp‑type grippers hold workpiece edges via air‑cylinder or servo‑controlled upper‑lower jaws. They provide high clamping force for heavy parts with low flatness requirements. Smoothed jaw surfaces are required to mitigate jaw marks; flanged workpieces can be reliably clamped on flanging areas.

Hook‑type grippers engage process holes for secure positioning. Hooks must match hole dimensions, and hook replacement is required for varying hole sizes.

Quick‑change interfaces enable gripper swap within minutes for multi‑variant production, ensuring high re‑positioning accuracy without disassembling the whole manipulator end unit.

Gripper weight shall be minimized with aluminium alloy or high‑strength engineering plastics under strength constraints; excessive weight degrades manipulator dynamic performance and limits cycle rate.

Surface protection is critical. Contact surfaces of clamps and hooks shall be burr‑free. Soft gaskets or coatings are adopted for high‑appearance‑quality parts. Clamping force shall be precisely regulated to avoid indentation or workpiece dropping.

Properly‑designed grippers realize stable holding, scratch‑free surfaces and convenient change‑over, improving overall line efficiency and part quality compared with manual handling which causes fingerprints and scratches.

Guangdong Ruihui Intelligent Technology Co., Ltd., a national Specialized, Refined, Differential and Innovative “Little Giant” enterprise headquartered in Dongguan with over 20‑year stamping‑automation experience, employs more than 400 staff including over 80 R&D engineers. Ruihui provides custom‑engineered grippers including vacuum cup, clamp‑type and hook‑type configurations equipped with quick‑change interfaces for sheet‑metal stamping automation. Nearly 5,000 sets of Ruihui‑manufactured equipment operate globally, serving well‑known OEMs and Tier‑one suppliers such as BYD, Geely, Volkswagen, Tesla, BMW, Mercedes‑Benz, Honda and Jaguar Land Rover.

With years of hands-on experience, I have honed my skills in navigating the complexities of global commerce, offering invaluable insights and solutions to address customer needs. My commitment to excellence and dedication to customer satisfaction ensure that I deliver exceptional service, guiding clients through every step of the trading process with confidence and proficiency.

icon of whatsapp Chat on WhatsApp