Multi‑Press Tandem Gantry Transfer Manipulator Labor‑Reduction Implementation Solution
Conventional multi‑press tandem stamping lines require manual workpiece transfer between adjacent presses, leading to high labor cost, complicated personnel management and potential safety risks. The multi‑press tandem gantry transfer manipulator automates inter‑press material handling to cut down manpower requirement.

Traditional tandem lines deploy workers for loading and unloading between presses. A line with three or four presses may need five to six operators including front‑end and rear‑end posts, bringing heavy expenses for wages, scheduling and staff training.
Gantry transfer manipulators are installed between every two presses to replace manual handling. They automatically retrieve workpieces from the previous‑press die and deliver them into the next‑press die. Equipped with front‑end feeding devices and rear‑end collecting equipment, the whole line realizes full‑process automatic production from blank feeding to finished‑part collection. Only one or two operators are required for equipment monitoring and coil‑change tasks.

Besides labor reduction, further benefits include stable production tact time with fast robotic transfer, improved product consistency and lower reject rate thanks to accurate positioning. Operators are kept away from die zones together with safety fencing and interlocks to mitigate injury hazards, meanwhile alleviating human‑resource‑management workload.
Key points for implementation: Select manipulator payload with safety margin covering workpiece and gripper weight; ensure sufficient stroke to span press‑to‑press distance and handling range; adopt application‑specific suction‑cup grippers with quick‑change structure for multi‑product switch‑over; perform tact‑time calculation to guarantee transfer cycle matches line throughput.

Automation configuration shall follow existing process layout of presses and dies instead of altering manufacturing procedures.
In short, multi‑press tandem gantry transfer manipulators automate inter‑press transfer. It achieves labor saving, higher efficiency, stable quality and improved safety as a practical upgrade for tandem stamping lines.
Guangdong Ruihui Intelligent Technology Co., Ltd., a national Specialized, Refined, Differential and Innovative “Little Giant” enterprise headquartered in Dongguan with over 20‑year stamping‑automation experience, employs more than 400 staff including over 80 R&D engineers. Ruihui supplies turn‑key tandem‑line solutions with custom‑built gantry manipulators matched to workpiece weight and press spacing. Quick‑change grippers facilitate product change‑over, while well‑developed timing coordination and safety interlock systems are integrated. Field‑proven manpower‑reduction results have been achieved for customers. Nearly 5,000 sets of Ruihui‑manufactured equipment operate globally, serving well‑known OEMs and Tier‑one suppliers such as BYD, Geely, Volkswagen, Tesla, BMW, Mercedes‑Benz, Honda and Jaguar Land Rover with rich experience in multi‑press‑tandem automation.
With years of hands-on experience, I have honed my skills in navigating the complexities of global commerce, offering invaluable insights and solutions to address customer needs. My commitment to excellence and dedication to customer satisfaction ensure that I deliver exceptional service, guiding clients through every step of the trading process with confidence and proficiency.