1. Home
  2. Knowledge
  3. Tandem Stamping with Translational Manipulator Loading‑Unloading for Hardware Accessories

Many hardware‑accessory stamping parts require 2‑4 working procedures. When all dies cannot be arranged on a single press, multiple presses are deployed in tandem. Manual inter‑press transfer is labor‑intensive and unstable, which can be solved by translational‑manipulator automation.

In this solution, presses are arranged sequentially for separate processes. One translational manipulator is installed between every two adjacent presses for workpiece transfer. Front‑end feeding equipment delivers sheets to the first press, while rear‑end receiving equipment collects finished parts to realize full‑process automatic production.

After the preceding press finishes stamping and its slide rises to the safe position, the translational manipulator retrieves workpieces from the die, transfers them to the next press, places parts accurately and retracts. The subsequent press then executes stamping, and such pick‑transfer‑place cycles run continuously.

This configuration brings multiple benefits. Firstly, labor reduction: only one or two operators are required for the whole line instead of several manual handlers. Secondly, high efficiency: fast manipulator transfer maintains stable takt and guaranteed output for mass‑production hardware parts. Thirdly, improved quality: consistent positioning lowers reject rate. Fourthly, enhanced safety: operators are isolated from die zones with safety fencing and interlock protection.

Key configuration points include adequate payload with safety margin covering workpiece and gripper weight, sufficient stroke to cover press spacing and pick‑and‑place range, quick‑change suction‑cup grippers tailored for part geometry, and takt simulation for coordination with upstream feeding and downstream receiving devices.

Equipment selection between single‑press and multi‑press layout shall be determined by product process characteristics. Presses and dies should be planned prior to automation integration, and suitability rather than absolute superiority shall be the criterion.

In summary, tandem‑press stamping equipped with translational manipulators automates inter‑press loading‑unloading. It achieves labor saving, higher efficiency and stable quality and represents a widely‑adopted automation scheme for hardware‑accessory stamping.

Guangdong Ruihui Intelligent Technology Co., Ltd., a national Specialized, Refined, Differential and Innovative “Little Giant” enterprise headquartered in Dongguan with over 20‑year stamping‑automation experience, employs more than 400 staff including over 80 R&D engineers. Ruihui supplies fully‑integrated tandem‑press lines with customized translational manipulators matched for workpiece weight, press spacing and running speed. Quick‑change grippers facilitate multi‑product change‑over, together with well‑established press timing and safety interlock logic. Nearly 5,000 sets of Ruihui‑manufactured equipment operate globally. The company cooperates with well‑known OEMs and Tier‑one suppliers such as BYD, Geely, Volkswagen, Tesla, BMW, Mercedes‑Benz, Honda and Jaguar Land Rover and possesses abundant practical experience in hardware stamping.

With years of hands-on experience, I have honed my skills in navigating the complexities of global commerce, offering invaluable insights and solutions to address customer needs. My commitment to excellence and dedication to customer satisfaction ensure that I deliver exceptional service, guiding clients through every step of the trading process with confidence and proficiency.

icon of whatsapp Chat on WhatsApp