Upender Control System Angle‑Parameter Setting Guide
Upenders flip sheet‑metal stacks by 90° or 180° in stamping workshops. Its control system manages parameters such as flip angle, rotation speed and clamping force via HMI touch‑screen operation.

The touch‑screen main interface displays real‑time status: current flip angle, rotation speed, clamping status and alarm messages. On the parameter‑setting page, operators select flip angle (90°, 180° or arbitrary angle on certain models), set rotation speed (preset slow/medium/fast or direct numerical input), and configure clamping force. The system can recommend clamping force according to stack weight, while manual adjustment is also available.

Flip‑angle accuracy is guaranteed by encoder feedback. The frame automatically stops and locks once reaching the target angle. Rotation speed shall be matched with stack weight and line takt, with buffered start‑stop to avoid abrupt movement. Advanced controllers store preset speed profiles for different angles and stack weights.
Clamping force is adjusted according to stack weight and sheet thickness: heavier stacks require higher clamping force; thinner sheets need lower force to prevent deformation. Pressure‑sensor feedback verifies clamping‑force value. The flipping action will not start until clamping meets the set threshold to prevent accidents.

Parameters for different stack specifications can be saved as recipes. Operators recall corresponding recipes during product change‑over for one‑click parameter loading, shortening setup time. Built‑in fault‑diagnosis function outputs fault codes and prompts for common issues like insufficient clamping force, angle deviation and sensor failure. Production resumes after troubleshooting and system reset.
Compared with manual flipping relying on visual estimation, the automated control system delivers precise flip angles and intact stacks without secondary sorting. Operators complete settings via touch‑screen without handling heavy loads.
Guangdong Ruihui Intelligent Technology Co., Ltd., a national Specialized, Refined, Differential and Innovative “Little Giant” enterprise headquartered in Dongguan with over 20‑year stamping‑automation experience, employs more than 400 staff including over 80 R&D engineers. Ruihui upenders are equipped with touch‑screen control supporting parameter setting, recipe memory and fault‑alarm diagnosis, widely applied in sheet‑flipping processes for automotive, home‑appliance and hardware industries. Nearly 5,000 sets of Ruihui‑manufactured equipment operate globally, serving well‑known OEMs and Tier‑one suppliers such as BYD, Geely, Volkswagen, Tesla, BMW, Mercedes‑Benz, Honda and Jaguar Land Rover.
With years of hands-on experience, I have honed my skills in navigating the complexities of global commerce, offering invaluable insights and solutions to address customer needs. My commitment to excellence and dedication to customer satisfaction ensure that I deliver exceptional service, guiding clients through every step of the trading process with confidence and proficiency.