1. Home
  2. Knowledge
  3. Scrap‑Edge Handling for Slitting Line Configuration Solution for Scrap‑Edge Winder

During slitting‑line operation, trim scraps are generated from coil edges and between divided strips. Loose scrap edges cause messy workshop conditions, equipment entanglement and personal‑injury risks. The scrap‑edge winder automatically winds trim scraps into compact rolls for collection.

Trim scraps from the slitter are guided via chutes onto the winder drum. The rotating drum coils scrap material. Upon reaching preset diameter, the drum contracts or tilts to discharge scrap rolls into waste bins in fully‑automatic cycles without manual tidying.

Equipment specification shall match scrap‑edge characteristics. Thicker and wider scraps demand higher torque and robust drums; thin narrow scraps allow higher rotational speed with smaller‑diameter drums. Multiple‑drum or multiple‑unit winders are required for multi‑channel scrap generation. Normally installed on the outlet side of the slitter, the winder aligns with discharge chutes to prevent jamming and wandering. Linked with the main slitting‑line unit, it starts and stops synchronously to avoid scrap accumulation or breakage.

An alternative solution is the scrap‑edge shredder, which cuts narrow hard‑to‑wind trims into small fragments for easy collection and transportation. Selection between winding and shredding depends on scrap dimensions and site conditions.

Automatic scrap‑edge treatment improves workshop tidiness and operational safety by eliminating sharp loose trims. Continuous slitting‑line production is sustained without frequent manual cleaning; compact scrap rolls or fragments facilitate recycling and material handling. Operators only need periodic removal of finished scrap rolls and can focus on equipment monitoring and coil change‑over.

Guangdong Ruihui Intelligent Technology Co., Ltd., a national Specialized, Refined, Differential and Innovative “Little Giant” enterprise headquartered in Dongguan with over 20‑year stamping‑automation experience, employs more than 400 staff including over 80 R&D engineers. Its slitting lines are configurable with scrap‑edge winders or shredders tailored to scrap width and channel quantity. Synchronized speed‑linkage between winder and main‑line equipment ensures automatic scrap‑edge collection for improved safety and site order, widely adopted in automotive, home‑appliance and hardware industries. Nearly 5,000 sets of Ruihui‑manufactured equipment operate globally, serving well‑known OEMs and Tier‑one suppliers such as BYD, Geely, Volkswagen, Tesla, BMW, Mercedes‑Benz, Honda and Jaguar Land Rover.

With years of hands-on experience, I have honed my skills in navigating the complexities of global commerce, offering invaluable insights and solutions to address customer needs. My commitment to excellence and dedication to customer satisfaction ensure that I deliver exceptional service, guiding clients through every step of the trading process with confidence and proficiency.

icon of whatsapp Chat on WhatsApp