ME Heavy Duty Decoiler

Heavy material frame is welded by steel plate, useful for long distance bearing support point, there is no force and power, bearing coil material is supported by four sides of the tile plate, usually through the hand crank type up tight coil material, for the coil material heavier also with oil pressure expansion, and in order to facilitate the loading of the coil material, but also with oil pressure loading cart, electric control part of most of the machine are not added frequency converter speed adjustment, only for the material frame heavier only Only for the heavier material frame can the frequency converter be added to adjust.

There are manual type, pneumatic type and hydraulic type of mandrel expansion and contraction respectively, and you can choose the required model according to the width and weight of the coil. Generally when the material thickness is close to 2.0mm, consider the need to increase the press arm device, because at this time the material tension material weight exceeds 2T, consider increasing the hydraulic expansion.

Our heavy-duty uncoilers are equipped with a compression arm to keep the coils tight during the uncoiling process. The support arm can also be used for thick materials. In addition, the uncoiler has a wire break system to avoid loosening of the coils. For this purpose, we have also added circuit control devices placed under the coils.