How Hot Stamping Loading Unloading Robots Achieve High-Temperature Resistance Key Points for End Effector Material Selection
Hot stamping produces high-strength steel parts, and the blanks must be heated to around 800–900°C. Throughout
Dive into our Product Knowledge Hub, where our expert sales team shares valuable insights on product knowledge and after-sales service, and more. Gain exclusive access to insider tips and resources to enhance your product ownership experience.
Hot stamping produces high-strength steel parts, and the blanks must be heated to around 800–900°C. Throughout
Hot stamping is an important process for producing high-strength steel parts: the blank is heated to around 80
The output cycle time of a multi-press tandem line is limited by two factors: the stroke speed of the presses
In industries such as home appliances, 3C, and telecommunications, many medium-to-large sheet metal parts are
Automotive body sheet metal parts, especially body panels, are large in size, require many operations, and dem
The stamping production of large sheet metal parts is different from that of small and medium-sized parts. The
The 3D transfer robot is the core of a single-press multi-station stamping line. Whether it is selected well d
In a single-press multi-station stamping line, the 3D transfer robot's job is to move workpieces back and fort
Sheet cutting for new energy battery enclosures follows a different approach from ordinary sheet metal parts.
Blanking for automotive body panels has always been a step in stamping production. The traditional method uses